Type to search

Kitchen

Four Easy Plumbing Tips For Beginners

Share

Four Easy Plumbing Tips For Beginners

There’s nothing worse than a plumbing emergency. It can be expensive, inconvenient, and downright scary. 

If you’re a homeowner, it’s important to be prepared for the occasional plumbing issue by having some tried-and-true plumbing tips up your sleeve. This way, you can hopefully take care of the problem yourself and avoid costly and stressful emergencies. 

After familiarizing yourself with the following plumbing tips for homeowners, you can check out this post all about dealing with a leaky bathroom sink drain.

Four Of The Best Plumbing Tips For Homeowners And Beginners

Plumbing is a necessary but often confusing home maintenance task. If you’re a beginner, the prospect of dealing with pipes and fixtures can be daunting. 

However, there are some invaluable tips that you can use to make the process easier:

  • How to fix a leaky faucet
  • How to unclog a drain
  • Replacing a toilet seat
  • Using a plunger

#1 — How to fix a leaking faucet

A leaky faucet can be a real nuisance. Not only is it annoying, but it can also waste a lot of water. 

Fortunately, there are a few simple plumbing tips for homeowners that can up anyone’s faucet-fixing game!

First, try tightening the handle. If that doesn’t work, then you may need to replace the O-ring. Once you’ve done that, turn on the water and see if the leak has stopped. If it hasn’t, then you may need to replace the washer. With a little elbow grease, you should be able to fix your leaky faucet in no time.

#2 — How to unclog a drain

Clogged drains are a common problem for countless homeowners, but they don’t have to be difficult to fix. 

First, try using a plunger. If that doesn’t help the situation, you can try using a drain snake. You can remove the sink stopper and insert the drain snake into the drain. Turn the handle to rotate the snake as you push it down the drain. Continue until you feel resistance, then turn the handle in the other direction to loosen the clog. Once you’ve loosened the clog, remove the snake and run water down the drain to clear any remaining debris. 

If your drain is still clogged up with debris, you can repeat this process or try using a chemical drain cleaner. Make sure that you follow the instructions on the cleaner carefully, as some cleaners can be harmful if used incorrectly. With a little effort, you should be able to clear up most clogged drains.

#3 — Replacing a toilet seat

Replacing a toilet seat may seem like a daunting task, but it’s actually quite simple. 

Most toilet seats are held in place by two bolts that are hidden by plastic caps. To remove the old seat, start by unscrewing the caps and then removing the bolts. Once the bolts are removed, the seat can be lifted off of the toilet. If the new seat is the same size and shape as the old one, it should fit onto the toilet easily. Simply line up the holes with the bolts and screw everything back into place. 

If the new seat is a different size or shape, you may need to replace the bolts as well. To do this, start by measuring the distance between the holes on the new seat. Then, use a drill to create new holes in the toilet that are the same distance apart. Once the new holes are in place, you can install the seat using the same process as before. With just a few simple steps, you can easily replace an old or damaged toilet seat.

#4 — Using a plunger like a pro

A plunger is a simple, yet essential tool for keeping your drains clear. When used correctly, a plunger can dislodge most clogs and get your drain flowing again. 

Plungers come in two main types: cup plungers and flange plungers. 

Cup plungers are the most common type and can be used on most types of drains. To use a cup plunger, simply place the rubber cup over the drain, apply pressure, pull up and repeat. For best results, ensure that the cup forms a tight seal around the drain. 

Flange plungers are designed for use with toilets and have a small flange at the bottom of the cup. To use a flange plunger, place the rubber cup over the toilet bowl and position the flange over the drain hole. Apply adequate pressure in an up and down motion to create suction and break up the clog. Just remember to clean your plunger after using it.

With a little practice, you’ll be able to clear most clogs with a plunger.

Easy Plumbing Tips For Pros And Beginners — Final Thoughts

Although we have tried to provide some tried-and-true plumbing tips for beginners in this article, it is always best to consult an experienced plumber when faced with a plumbing emergency or issue. 

A good plumber can help you avoid future water damage in your home and fix the problem quickly and efficiently.

Jacob Lindsey

Jacob is a home remodeling guru having worked over 15 years in construction in Reno, NV, mainly focused on home renovations. He likes taking ideas from his clients and making them a reality.

  • 1